Anritsu MD8480C Options ISDN.4BTS(HSDPA)

W-CDMA (UMTS) Signalling Tester

Bookmark and Share
Our Price:
call for quote
Item #:
32235200
Manufacturer:
Model #:
MD8480C
Condition:
Used
Availability:
Call for availability.
Shipping Message:
FCA Tokyo Japan
Quantity

The MD8480C W-CDMA Signaling Tester has been specifically designed for developing and testing 3GPP wireless devices including protocol stacks, chipsets, and application software. Supporting W-CDMA, HSPA, HSPA Evolution, GSM, GPRS and EGPRS services in a single unit, it is the first HSPA signaling tester in the industry, and the only one with full HSPA capability including 42 Mbps DL/11 Mbps UL maximum data throughput. The MD8480C air interface fully complies with the 3GPP recommendations.

The MD8480C provides chipset and wireless device encoding/decoding tests and regression testing as well as protocol sequence tests such as registration, origination, termination, handover (option), and UE/NW release. It also supports application tests for voice communication, packet communication, and end-to-end communication (using two MD8480C units).

Optional GSM/GPRS/EGPRS features allow testing handover between W-CDMA/HSPA and GSM/GPRS/EGPRS. In addition, the MD8480C is well suited for the development of UMTS wireless devices supporting global bands and sophisticated application software.

  • UE testing for W-CDMA/HSPA, GSM/GPRS/EGPRS support
  • Application testing including HSPA protocol compliance
  • Interoperability testing for wireless devices and networks
  • Research and development of W-CDMA/HSPA (UMTS) chipsets
  • Modulation/demodulation tests for W-CDMA/HSPA mobile devices
  • Achieves 42 Mbps maximum data downlink throughput
  • Configurable for up to 4 base stations for handover testing and other multi-system tests
  • Simulates BTS of W-CDMA/HSPA and GSM/GRPS/EGPRS systems
  • Protocol sequence tests for mobile devices such as call set-up and registration
  • Flexible settings for test parameters and sequences for protocol sequences
  • Protocol Trace function
  • Voice, circuit and packet switched application testing such as AMR voice, IP, PPP and ISDN BER and BLER W-CDMA receiver measurements

MD8480C signalling tester specifications (for W-CDMA):

  • Frequency range
    • Tx: 300 MHz to 3000 MHz
    • Rx: 350 MHz to 2700 MHz
  • Maximum input level (total level)
    • +40 dBm (Main connector)
    • +20 dBm (Uplink connnector)
  • RF input/output connector
    • Main: N type, Impedance: 50Ω, VSWR: ≤1.3
    • Downlink 1: SMA type, Impedance: 50Ω, VSWR: ≤2.0
    • Downlink 2: SMA type, Impedance: 50Ω, VSWR: ≤2.0
    • Uplink: SMA type, Impedance: 50Ω, VSWR: ≤2.0
  • Reference oscillator
    • Frequency: 10 MHz
    • Startup characteristics: ≤±5 × 10–8 (10 minutes after power-on, referenced to 24 hours after power-on)
    • Aging rate: ≤±2 × 10–8/day, ≤±1 × 10–7/year (referenced to 24 hours after power-on)
    • Temperature: ≤±5 × 10–8 (0˚ to 40˚C, referenced to 25˚C)
    • External reference input: BNC type, 10 MHz, 2 to 5 Vp-p
    • Reference output: BNC connector, 10 MHz, TTL level
  • Transmitter frequency resolution: 100 kHz
  • Maximum Tx channels: 30 ch (120 ch maximum with option)
  • Maximum Tx power
    • Main: –25 dBm/ch
    • Downlink 1: –10 dBm/ch
    • Downlink 2: –10 dBm/ch
  • Tx power setting range
    • Setting range: 0 to –120 dB from Tx power (by ATT)
    • Resolution: 0.1 dB steps
  • Modulation (transmitter): QPSK, 16QAM (with MU848072C-01), 64QAM (with MX848001E-13)
  • Chip rate: 3.84 MHz
  • Receiver frequency resolution: 100 kHz
  • Rx input level range
    • Main: –30 to +40 dBm
    • Uplink: –50 to +20 dBm
  • Modulation (receiver): BPSK, 4PAM (with MX848001E-13)
Status -

This item is also in the following categories